Doc: https://www.waveshare.com/wiki/Servo_Driver_HAT;
Want to notice: https://drive.google.com/file/d/12aoAD1e0KGzBRd98VF6NUs4_sGvZUBYZ/view?usp=sharing;
For sure, the Raspberry Pi is highly effective sufficient generally, but it isn’t that good at offering exact PWM output. You could have tried to regulate a robotic arm or a hexapod walker by utilizing the Pi, however lastly get annoyed as a result of restricted variety of PWM outputs and the jittering servo. Now you get a brand new choice to deliver your concepts to life, we put together this handy Servo Driver Board for you.
Options:
Raspberry Pi connectivity, suitable with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano
I2C managed, utilizing solely 2 pins
As much as 16-Channel servo/PWM outputs, 12-bit decision for every channel (4096 scales)
Integrates 5V regulator, as much as 3A output present, will be powered from battery via VIN terminal
Commonplace servo interface, helps widespread used servo similar to SG90, MG90S, MG996R, and so forth.
Reserved I2C management pins, permits to work with different management boards
Specs:
Energy provide: 5V (Pi connector) OR 6V~12V (VIN terminal)
Servo voltage: 5V
Logic voltage: 3.3V
Driver: PCA9685
Management interface: I2C
Dimension: 65mm x 30mm
Mounting gap dimension: 3.0mm
Package deal Together with:
1 * PWM Servo Motor Driver IIC Module
1 * RPi screws(2 pack)
Be sure this fitsby getting into your mannequin quantity.
Be aware: Raspberry Pi and servo within the images are NOT included. Consumer handbook: Please get the hyperlink from the product description beneath
Be aware: 1.For those who solely join 5V energy provide to USB interface, servo can’t be pushed; 2.It is best to join larger energy provide for higher-power servo; 3.Be sure servo are linked correctly, in any other case they won’t transfer.
Servo Motor Driver: You could have tried to regulate a robotic arm or a hexapod walker by utilizing the Raspberry Pi, however lastly get annoyed as a result of restricted variety of PWM outputs and the jittering servo. Now you get a brand new choice to deliver your concepts to life, we put together this handy Servo Driver Board for you.
Raspberry Pi connectivity, suitable with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano.
I2C managed, utilizing solely 2 pins; As much as 16-Channel servo/PWM outputs, 12-bit decision for every channel (4096 scales); Integrates 5V regulator, as much as 3A output present, will be powered from battery via VIN terminal.
Reviews
There are no reviews yet.