The PC 9Pin USB 2.0 header can cut up the USB 2.0 from male 1 to 4 femal. USB 2.0 splitter with double sided foam tape (together with 3M agency adhesive), it’s simple to stick on the principle board.
Can be utilized for fan, led strip, USB hub, wifi router and different USB units. This can be a USB header multiplier for motherboard USB 2.0 header.
Connector A: 9 Pin USB 2.0 Male
Connector(s) B: 4X 9 Pin USB 2.0 Feminine
Double chipset included, secure connection.
Materials: Plastic + Metallic
Motherboard measurement: 25×50mm/0.98×1.97in
Cable size: 30cm/11.81in
Foremost Shade: Black
Benefit: with again glue, could be fastened on most important board firmly.
Instruction for Set up USB 2.0 motherboard splitter
Step 1: Plug USB header into the entrance USB connection.
Step 2: Paste at any handy location with 3M sticker.
Step 3：Join with 4 units with USB 2.0 header, like DIY gentle bar, cooling Fan, and wifi router.
Bundle Together with:
9 pin USB header splitter PCB board*2pcs;
9 pin USB motherboard splitter cable*1pcs;
Be sure that this fitsby coming into your mannequin quantity.
This can be a 9pin USB 2.0 header splitter for motherboard, as usually have 1 or 2 entrance USB connector interface, however this adapter can extension from male 1 to 4 feminine, one hook up with motherboard 9pin (10pin.) port can cut up to 4 x 9-pin (10pin).
Inside USB hub with wired belt shielding, this connection can guarantee a secure connection, enable so as to add further PC elements to motherboard, and combine with motherboard regardless of restricted USB headers.
The usb 2.0 inner hub have a brief circuit outlet design, can stop your motherboard USB interface from quick circuit.
USB hub for motherboard, as it might convert motherboard 1 USB 2.0 male to 4 feminine. With a 30cm USB head cable, it simple to position the board at a handy location.
The inner USB 2.0 hub can self-stick with 3M agency adhesive, can be utilized as a fan splitter for motherboard, add cool led strip on your motherboard, and for USB extension connector.