TweakTown’s Score: 95%
The Backside Line
The Meshroom S from SSUPD is a superb follow-up to the Meshilicous. The flexibility to accommodate a full ATX motherboard and different full-size parts places the Meshroom S a step above.
Professionals
- + Mesh aspect panels throughout
- + Helps both 240mm or 280mm radiators, and 360mm with adapter accent
- + USB Kind-C port and solely 15 liters
- + Can match a full-size ATX motherboard
- + Extraordinarily good building and really thought out
Cons
- – Energy swap cable might have been longer or had an extension included
- – Should use an SFX PSU if utilizing a full ATX motherboard
Do you have to purchase it?
Keep away fromThink aboutShortlistPurchase
Introduction, Specs, and Pricing
20VIEW GALLERY – 20 IMAGES
SSUPD is a sister firm of Lian Li, so if this evaluate appears like a evaluate of a Lian Li case, that is why. SSUPD debuted with the superior all-mesh case often known as the Meshlicious. Boy, oh boy, did Meshlicious make a splash within the SFF group, coming in at a ridiculous measurement of 14.67 liters whereas supporting mITX and Mini DTX motherboards.
Whereas the Meshlicious was nice in all, the complete ATX group will get the complete remedy right here with the Meshroom S. Touting the flexibility to deal with a full-size ATX motherboard and a four-slot GPU in several configurations.
The mannequin I’ve for evaluate right this moment is the fossil grey colour, with different colour choices obtainable. Pricing for the Meshroom S begins at $120 and $170 with a PCI-E 4.0 riser cable.
20
SSUPD Meshroom S Mini-ITX Small Type Issue (SFF) Case
| Immediately | Yesterday | 7 days in the past | 30 days in the past | ||
|---|---|---|---|---|---|
| $109.99 | $109.99 | – | |||
|
* Costs final scanned on 11/15/2022 at 6:24 pm CST – costs is probably not correct, click on hyperlinks above for the most recent worth. We might earn an affiliate fee. |
|||||
Packaging
20The Meshroom S arrived very protected and in fine condition. Fairly minimal labeling on the skin of the field, so let’s open it up and test it out.
20Pulling the Meshroom S out of its small cardboard field reveals a well-known sight, the 2 styrofoam finish caps and a plastic bag for added safety.
Exterior the SSUPD Meshroom S
20The outside of the Meshroom S is effectively, all mesh. Apart from the rear panel the place the I/O is positioned, each panel has a positive mesh to permit most airflow.
20Pulling off the primary of 4 sides, the highest and entrance panels, reveals the locking system the Meshroom S makes use of to carry the mesh aspect panels on.
20With all of the aspect, high, and entrance panels off, the skeleton of the Meshroom S stays, which is created from powder-coated SGCC metal. Entrance fan assist is proscribed to both two 120mm followers or two 140mm followers with respective radiators, offered the end-user installs an mITX motherboard. Additionally supported is a 360mm radiator from the 360 Lengthen Bracket accent.
This view additionally provides you a have a look at the included PCI-E 4.0 riser cable that is included. Do word that this cable is just for mITX and DTX configurations. If a full ATX motherboard is used, an extended PCI-E riser cable should be used.
20The brown accent field right here has a plethora of stuff inside it. There’s lots to listing, so here’s a image of the content material listing.
20The entrance I/O has modified from having a single USB 3.2 Kind-A to having two and a Kind-C USB 3.2 Gen 2 slot.
20The ability button has been relocated to the rear of the Meshroom S as an alternative of being up entrance like within the Meshilicous.
Contained in the SSUPD Meshroom S
20One of many huge attracts with the Meshroom S is the compatibility for bigger motherboards like mATX or perhaps a full ATX. You do, nonetheless, need to make some compromises, for instance, giving up a full-sized ATX PSU for an SFX one and any entrance cooling choices.
20One other compromise isn’t with the ability to use any SATA ports with standard-sized ATX motherboards. The SATA ports butt proper up towards the entrance mesh panel.
20Put in here’s a Zotac GeForce RTX 3090 Trinity and a be quiet! Pure Loop 280mm CPU cooler, which was a really tight match. If it weren’t for the detachable sections of the Meshroom S, this combo wouldn’t have match.
20Talking of a decent match, the Zotac RTX 3090 Trinity has twin reverse eight-pin PCI-E plugs, so I needed to supply some reverse PCI-E adapters to make the tight flip to have the ability to match between the again of the GPU and the motherboard tray.
Check System, Set up, and Completed Product
20Set up of the check system was positively a bit difficult for certain. Nonetheless, I get pleasure from a problem. I by no means thought a full ATX system might match into this small footprint. Cable administration in an SFF case is thrown proper out the window, however I made a good try.
20At first, I wished to make use of a 280mm AIO, which turned out to suit, nevertheless it made me fear that becoming such a big radiator may not be doable with such a small kind issue case.
The difficulty I saved operating into was the pump on the be quiet! Pure Loop 280mm, which is inline on the tubing, as an alternative of being an Asetek design and being on the highest of the CPU waterblock, which might have made set up a bit simpler.
20One downside that made me suppose once more was my selection of PSU. I need to admit, I skimmed the consumer information the place it stated it was advisable to make use of an SFX PSU if putting in a full ATX motherboard, which is sensible when you concentrate on it.
There’s not sufficient bodily width for a full ATX PSU to suit except an mITX motherboard is put in. Fortunately I had a SilverStone SX700G readily available to make use of.
20Working the check system full tilt, temps actually weren’t a problem. The system was loaded up utilizing Aida64 Excessive’s System Stability check for 20 minutes with an ambient temp round 19C.
As soon as the system was totally saturated, temps at full load on the Intel Core i5 12600K maxed out at 71C, whereas the Zotac RTX 3090 Trinity sat a bit greater at 78C whereas at 100% load.
Last Ideas
20My closing ideas on the SSUPD Meshroom S are actually good. I’m totally impressed with how a lot {hardware} one can match into such a small kind issue whereas nonetheless having nice temps.
Very similar to another small kind issue construct, the construct course of was barely complicated however got here collectively fairly effectively. The one takeaway is to have an extended energy swap wire, as I needed to run mine immediately throughout the motherboard.
The Meshroom S has the flexibility to be as versatile because the builder desires it to be. If one desires to construct an mITX system, it is totally prepared for that. Micro-ATX, certain, simply swap out the PSU for an SFX PSU. If ATX is extra your fancy, the Meshroom S can accommodate that with the aforementioned SFX PSU swap, in addition to getting an extended PCIe 4.0 riser cable to make the attain occur.
What’s so fascinating concerning the Meshroom S is its modularity and flexibility. So usually is the case the place there’s a single imaginative and prescient from the producer, however within the SSUPD’s case, a number of visions have been achieved with the Meshroom S.
We overtly invite the businesses who present us with evaluate samples / who’re talked about or mentioned to specific their opinion. If any firm consultant needs to reply, we are going to publish the response right here. Please contact us should you want to reply.
