TweakTown’s Score: 95%
The Backside Line
Although the SE-207-XT Slim will not be the reply for everybody, it has not didn’t impress. With its compact measurement, lack of noise, respectable efficiency, and low price, it’s arduous to not give this cooler its dues.
Execs
- + Reasonably priced
- + Simple to put in
- + All black aesthetic
- + Decrease total peak
- + Expandability for extra efficiency
Cons
- – Lack of availability
- – Packaging leaves cooler extraordinarily dusty
Must you purchase it?
Keep away fromContemplateShortlistPurchase
Introduction, Specs, and Pricing
VIEW GALLERY – 33 IMAGES
When searching for a brand new CPU air cooler in your subsequent construct, it’s extremely unlikely that ID-Cooling is the primary title that involves thoughts. Nonetheless, from what we now have seen from them through the years, they’re an organization that needs to be in your radar on the very least. Extra particularly, concerning their SE sequence coolers, which reside within the high half of our charts, you discover acceptable efficiency, decrease noise ranges, and all will be had at value level in comparison with others of their segments.
Whereas the SE-207 fashions are nothing new, ID-Cooling has gone again to the desk with this concept, and after releasing the SE-207-XT Superior and Black variations of this design, they determined to have one more go at this design. The place the predecessors had been customary fare for dual-tower choices in CPU cooling, their total peak could have been a difficulty for these utilizing smaller instances. On high of lowering the general peak this time, ID-Cooling has determined to ship this cooler with only a single fan to chill the fins, lowering its depth and making for a extra inexpensive resolution.
What we now have for you this time is the aptly names SE-207-XT Slim from ID-Cooling. What you get is the entire styling that makes the earlier fashions so enticing, with out the entire bloat and extras that will have been a limiting issue to you selecting them previously. With the trail that ID-Cooling has taken this time, we really feel that they’ve widened their market whereas nonetheless providing the power to broaden upon its potential, do you have to want to improve to a extra highly effective CPU or determine to overclock what you will have for each final drop of efficiency.
The SE-207-XT Slim is a dual-tower CPU cooler with a thermal score of 220W, on the higher finish of what’s supplied at this time in air cooling of CPUs. CPU help consists of the present and plenty of previous Intel sockets whereas supporting AM4 and the upcoming AM5 motherboards. The most important change on this design is relatively than being 154 or 157mm in peak, with this final submission, we get a cooler that’s 120mm large, 110mm from entrance to again, however this time, it stands simply 135mm tall. ID-Cooling has saved the seven warmth pipes on this model and nonetheless gives a nickel-plated copper base because the earlier variations had, however the total weight has been decreased to 760 grams.
Quite than delivering a fan on the entrance of the primary tower and a second on the second fin array, ID-Cooling opts to ship one fan. It’s a 120mm PWM fan that spins on a hydraulic bearing and gives a velocity vary of 700 to 1800 RPM. This fan can ship 71.16 CFM of airflow at most velocity whereas pushing 2.16 mmH20O of static strain. The noise ranges are fairly excessive at 35.2 dB(A), however the fan sips simply 0.2A of present whereas doing what we addressed above.
There are some things left on the desk that it’s best to know. Initially, the SE-207-XT Slim comes with a two-year guarantee in opposition to defects, which will not be one of the best guarantee within the trade, however exterior of a failing fan, there’s little to go flawed. We additionally had been instructed of the fee related to this resolution and are happy to report that the MSRP has been set at solely $44.99, which is spectacular contemplating the price of many different dual-tower CPU cooling options in at this time’s market.
There may be one draw back to all of this, although. As we searched the web for a location to acquire this cooler, we discovered that it’s not but accessible in retail channels on this aspect of the pond, however we had been instructed that it might be accessible on Amazon quickly sufficient.
ID-Cooling SE-226-XT Black CPU Cooler
| Right this moment | Yesterday | 7 days in the past | 30 days in the past | ||
|---|---|---|---|---|---|
| $56.99 | $56.99 | – | |||
|
* Costs final scanned on 9/7/2022 at 6:27 pm CDT – costs will not be correct, click on hyperlinks above for the newest value. We could earn an affiliate fee. |
|||||
Packaging
Conventional for ID-Cooling, the SE-207-XT Slim is available in black and orange packaging. The ID-Cooling title and emblem are on the high of the panel, whereas most of its space is taken up with the big picture of the CPU cooler you can see contained in the field.
The proper panel on the packaging gives socket help for each Intel and AMD sockets. The white sticker shows the serial variety of your cooler, whereas on the backside are notations of compliances and methods of dealing with the product when accomplished with it.
The again of the field delivers 5 languages with listed specs which can be discovered on the finish of the entire bullet factors. It is a condensed checklist in comparison with what we discovered on-line however accommodates all of the pertinent info wanted to make sure correct fitment together with your chosen elements.
The left aspect of the packaging delivers a listing of options within the high portion. We see there’s PWM help for the fan, that it’s a dual-tower design, makes use of a copper base, consists of rubber anti-vibration on the fan, which is 120mm in measurement, and covers the bearing used. The decrease portion of the panel delivers the corporate info together with their social media and YouTube hyperlinks.
After tipping out the interior packaging and cooler for a greater look, we see the guide on high of froth masking the highest of the towers. The {hardware} is shipped between the towers in a white cardboard field, whereas the fan is positioned behind the tower, resting on a thicker foam part. Whereas the cooler is in wonderful form, we have to tackle the truth that it’s in extreme want of cleansing. With white used as the within of the field and the packing containers across the towers, mud is seen everywhere in the cooler, which we really feel may very well be simply remedied.
ID-Cooling SE-207-XT Slim CPU Cooler
The entrance view of the SE-207-XT Slim is of forty-six aluminum fins pushed onto seven 6mm diameter warmth pipes, all of that are black. A plastic cowl is hooked up to the highest fin on the high of the tower, and we will additionally see the shiny pipe tip covers standing tall above the fin array.
We talked about that this can be a dual-tower design, and there are not any offsets supplied, however we will see the mirrored design the place each fin stacks mimic one another. On the backside, we will see that the pipes will not be all in a row, and a few are offset from the others to make for extra environment friendly warmth switch to the fins.
For the reason that tower is a mirrored design, the again view of the SE-207-XT Slim is identical as what we discovered within the entrance, down to each final element. With none emblem on the cooler, there is no such thing as a set directionality of set up, simply that you’ve the airflow from the entrance to the again.
Once more, as a result of symmetric form and elegance of the fins, all we now have left to debate is the fan mounting places, that are contained to 2 grooves on both tower, permitting a fan on the entrance, one within the center, and one other on the again, do you have to choose to spend for the additional followers.
With regards to the fin form, we discover little to debate. The edges are the very best level, with a few hooks at both aspect to assist disturb the airflow. The middle portion is decrease to permit the fan to construct a head of steam earlier than getting into the tower, however we will additionally see that the underside six fins are reduce brief to permit for higher RAM clearance.
Between the towers is the cooler’s base, the place we discover a copper base with an aluminum high portion, to which the metal crossbar is secured. Utilizing the captured spring-loaded screws, you safe the tower to the remainder of the {hardware} we’ll present in a bit.
The pipes exit the bottom and make mild bends in order to not kink them however enter the fin stack in two rows. The fins are press-fit to the pipes, and the holes discovered within the fins are for meeting functions solely, as they add nothing to assist with airflow or warmth switch.
On the backside of the tower, we discover the washers that seize the mounting screws, with the second set of screws securing the crossbar to the bottom. The mating floor is nickel-plated copper, with the machine marks left seen of their round sample. The bottom is just not stage, as it’s convex so as to add strain, however is near stage and curves extra close to the perimeters than the middle.
The highest of the tower is trendy but has no emblem or something to designate the directionality of the set up. On the plastic caps, there’s a panel of brushed metallic utilized to up the model recreation, and whereas the edges of the pipe caps are shiny, their tops are machined, including that final little little bit of aesthetic attraction to the design.
Equipment and Documentation
For the reason that tower is black, it solely is sensible that the {hardware} match, as seen right here. On the left are the AMD brackets for each AM4 and AM5 motherboards. Within the heart is the mainstream Intel backplate, which is adjustable the place the studs cross by it, permitting customers to mount the Intel brackets seen on the proper to whichever supported socket you might be utilizing.
On the left, we discover the LGA 2011/2066 standoffs which mount on to the socket, adopted by 4 knurled nuts to safe the bracket to both the HEDT standoffs or the backplate. Within the center are the AMD and Intel spacer. The set of 4 screws is particular to AMD installations, and the final set of spacers to the best are particular to LGA 1700 motherboards.
ID-Cooling additionally features a 4-pin PWM fan splitter cable for many who want so as to add an additional fan, however we want it had been a three-piece splitter to cowl the entire fan choices. We additionally discovered a big Frost X25 Thermal paste syringe, however the tube is just not full, because it provides sufficient paste for a couple of utility makes an attempt.
We additionally discover three units of fan clips, however they aren’t all the identical form. The 2 on the high are barely totally different and are used to mount the fan between the towers, whereas the decrease pairs mount a fan on the entrance or the again of the towers.
The one fan that ships with the SE-207-XT Slim is that this black ID12025M12S fan. The body’s form is octagonal with 9 blades and rubber anti-vibration pads on the corners. Whereas the 4-pin PWM cable gives loads of size, it’s not sleeved however remains to be black to mix in with the construct.
The guide is kind of complete and begins with a components checklist to make sure you have all the pieces wanted to make use of it. Past that, there are illustrations in black and white with the steps highlighted in orange to indicate what is occurring. If the pictures will not be sufficient to get you by, there are additionally textual content descriptions of the steps to assist even essentially the most novice customers get by the method comparatively simple.
Set up and Completed Product
Beginning issues off, when putting in the cooler on our motherboard, we needed to take away the plastic bits from the highest of the motherboard first. As soon as out of the way in which, we set the correct spacers in place, then secured the brackets above and beneath the CPU with the offered screws.
With paste utilized and the cooler secured to the motherboard, our view is of the entrance fin stack and never a fan, as this design is made to make use of the fan between the towers. To be blunt, we just like the look, and the dearth of a fan makes for higher RAM clearance.
Whereas there’s not full RAM clearance with this cooler, the peak supplied by reducing the primary few fins brief will preserve many customers pleased. The one situation we will see is the bounds on the power to swap out taller RAM kits, however even then, most customers solely swap out RAM if one thing goes flawed.
With issues assembled as proven, we now have good clearance behind the tower for entry to the 8-pin EPS energy plugs, and this tower will provide the identical RAM clearance for HEDT methods behind the tower. Issues will probably be difficult if you happen to had been so as to add followers to the entrance or the again of the tower, however as it’s shipped, we like what we now have happening right here and are wanting to get to check out how properly the SE-207-XT Slim handles its enterprise.
Our final view of the SE-207-XT Slim is now with the motherboard on the testbed, and though certainly one of our RAM sticks is blocked from view, the view we get is clear wanting and high-end with the addition of the brushed metallic covers on the fin stacks. It additionally goes properly with the ASUS board and all of its brushed metallic surfaces.
Check System Setup, Thermal Exams, and Noise Outcomes
Chad’s CPU Cooler Check System Specs
- Motherboard: ASUS ROG Crosshair VIII HERO [Wi-Fi] (AMD X570) – Purchase from Amazon
- CPU: AMD Ryzen 5 3600X – Purchase from Amazon
- Reminiscence: Corsair Vengeance LPX 4000MHz 4X8GB
- Graphics Card: ASUS GeForce RTX 2060 6GB OC – Purchase from Amazon
- Storage: Galax HOF Professional M.2 1TB SSD
- Case: Hydra Bench Normal
- Energy Provide: ASUS ROG Thor 850W – Purchase from Amazon
- OS: Microsoft Home windows 10 House 64-bit – Purchase from Amazon
- Software program: AMD Ryzen Grasp, AIDA64 Engineer 6.25.5400, and CPU-z 1.92.0 x64
To see our testing methodology and to search out out what goes into making our charts, please discuss with our 2020 CPU Cooler Testing and Methodology article for extra info.
Thermal Outcomes
Whereas the 61.6°C end result could not appear so spectacular, enable us so as to add some perspective. It outperforms the H150i RGB PRO XT in balanced mode, and that has three followers cooling a a lot bigger set of fins, and we’re lower than three levels behind the SE-207-XT Black, which additionally ships with two followers and has extra tower to assist in the equation. Issues do not look that dangerous when you think about the entire components.
Whereas overclocked, the outcomes get higher because the SE-207-XT Slim widens the hole from the Corsair AIO, and the hole to the SE-207-XT Black has closed by almost a level. At 67.7°C, we’re in the midst of the pack with an inexpensive cooler that has been handicapped in comparison with many different dual-tower opponents.
Whereas issues get noisy on this try to maximise the efficiency, we will cut back the temperature one other 3.6°C from our earlier run. Including a second fan may give one other two or three levels in effectivity, and those that choose to take action will get 360mm AIO efficiency from this SE-207-XT Slim.
Noise Stage Outcomes
Below stock-loaded circumstances, the quickest the fan spun was 1295 RPM from the PWM fan curve. At the moment, we took an audio studying, discovering it to ship solely 26 dB of noise.
We elevated warmth and energy utilizing the overclocked profile, however the fan solely jumped to 1374 RPM throughout this take a look at run. At 35 dB, the fan is audible, however in most conditions, it will likely be silenced by the chassis followers and the GPU followers.
To get essentially the most from the SE-207-XT Slim, we pushed the fan with 12V provided to it and located our fan topped out at 1864 RPM, barely above spec. The noise stage additionally jumps to 50 dB, which is the place it will likely be simply heard.
Remaining Ideas
We just like the look of the SE-207-XT coolers and have since we first had been launched to them. We additionally really feel these towers should promote pretty properly, or ID-Cooling wouldn’t preserve making an attempt new and other ways of presenting them to us. That being stated, the combination of black on all of the components and the dressed-up high covers with the brushed metallic offers this CPU cooler a high-end really feel with out the high-end price ticket. There may be little to not recognize contemplating this tower is smaller than its predecessors, but it’s inside an anticipated vary of what we noticed them accomplish with extra followers strapped to the same design.
After all, anybody would need extra from a dual-tower design, as that’s their level, to compete on the high of the charts. Nonetheless, previously, to perform such a feat, lots of the options had been close to the $100 mark. We really feel that ID-Cooling will need to have gotten suggestions from customers who needed an inexpensive cooling resolution for mid-tower instances with out the hassles usually related to coolers like this. As shipped out of the field, the SE-207-XT Slim will get beat by fairly a couple of different options, however most of them can not drop one other two to 6 levels from what we noticed in testing like this.
Not solely that, you get many of the gear you want to make that occur, though we nonetheless want the Y-splitter cable included another 4-pin PWM fan connector in order that customers might energy all three followers from a single fan header. Nonetheless, to do one thing like that, we do must consider that you would spend $30 to $35 extra so as to add the additional followers, which might sway the affordability issue, however may very well be cheaper than lots of the different comparable coolers on the market in that quest for final efficiency.
Contemplating the dearth of noise when used underneath regular PWM circumstances, the truth that the cooler is just not some generic-looking resolution and that you simply wouldn’t have to spend $50 to get what we now have in hand is spectacular in our minds. At $44.99, when the SE-207-XT Slim hits the market, we really feel there are various on the market that may see the potential of this cooler and make the transfer to attempt one thing from ID-Cooling, possibly for the primary time.
Now we have seen many options from ID-Cooling previously, and so they all have accomplished surprisingly properly; and within the SE-207-XT Slim, we will say the identical. For what we got, we actually couldn’t have anticipated it to beat a 360 mm-based AIO nor would we now have thought it might stick so near the efficiency of its larger brothers.
