Top Motherboards

darkFlash CX6 AURORA SPECTRUM RGB Followers Assessment


Assessment Abstract

The darkFlash CX6 AURORA SPECTRUM RGB followers are pocket-friendly followers which are greatest suited to case air flow although the person can use them on the radiator with a little bit of efficiency loss. They pack an excellent and vibrant ARGB gentle present. If you’re up for some colour customization and don’t wish to spend a luck but nonetheless need a first rate efficiency then check out these followers.

  • Thermal Efficiency: – 8.5/10

  • Worth – 9/10

  • Construct High quality – 9/10

  • Noise Efficiency – 7.5/10


  • First rate Efficiency
  • PWM Connector
  • Construct High quality
  • Attractiveness
  • A-RGB Lighting
  • Commonplace Connectors

Followers, followers, followers! I’ve been testing quite a lot of followers currently, a serious a part of which is coming from the Alphacool SuperNova 1260mm radiator (on different media websites). A neighborhood supplier approached us asking to check the darkFlash followers in 120mm measurement. We agreed, and they also despatched us the CX6 AURORA SPECTRUM RGB followers.


Product darkFlash CX6 AURORA SPECTRUM RGB White
Dimensions 120x120x25mm
Fan Velocity 800-2000±10% RPM
Noise Degree 18-30 dBA (Max)
Airflow 55.29 CFM
Static Stress 1.63mm H₂O
Present 0.3-0.5
MTTF 30,000 hrs
Bearing Kind Rifle Bearing

You may get these followers in 4 colours:

  • Black
  • White
  • Pink
  • Neo Mint

Every of those colours is out there within the following configuration:

  • A single fan pack
  • A 3-in-1 followers pack
  • A 5-in-1 followers pack

These followers can be found in PWM and Voltage base management variations. We’ve acquired 3x CX6 white colours followers in a single fan pack. Talking of the specs, these followers are rated for as much as 2000 RPM producing a 55.29 CFM at 1.63mm H₂O air strain. It looks like darkFlash is focusing on these followers for case air flow. If that’s the case, then these stats make sense.

Associated Learn: White PC Circumstances & Greatest White CPU Coolers

Packing Field

Packaging Field

The fan is shipped inside a paperboard packing field in black and orange colours. You may see that there’s a image of the fan on the field’s entrance. Right here, essentially the most essential info is printed on the highest, which says that it is a PWM model.

DARKFLASH CX6 AURORA SPECTRUM RGB White - backside of the box
The Bottom of the Field

The bottom of the field has an inventory of specs in a number of languages. Because the followers we obtained are in white colour, the white field is ticked.

DARKFLASH CX6 AURORA SPECTRUM RGB White - 4x self-tapping screws
4x self-tapping screws

DARKFLASH has supplied 4x self-tapping screws within the field.

Nearer Look

It’s time to check out the followers.

The fan in all its glory

The fan has a dimension of 120x120x25mm and comes with 7x translucent blades. Any two mounting corners are aside by a distance of 105mm. The body of the fan is white in colour. Although the colour will not be pure white however offers a blue-white trace. The middle can also be translucent with darkFlash branding.

DARKFLASH CX6 AURORA SPECTRUM RGB White - 3D striped fan blades
3D striped fan blades

The blades have a 3D striped design with every blade having 3 of such stripes. These stripes protruded in direction of the trailing fringe of the blades. This design might be used to generate extra sustainable airflow throughout the perimeters whereas decreasing the drag. The body has a rounded slop-down design on the corners.

Mounting Nook

Every mounting nook has a cut-to-size anti-vibration pad which can also be in white colour. The mounting nook is a bit scratched hinting that the fan might be used earlier than.

DARKFLASH CX6 AURORA SPECTRUM RGB White - frame of the fan
The Body of the Fan

There’s a striped design on the body of the fan in fairly a method. The body is sort of sturdy and rigid, and the construct high quality of the fan can also be high-quality. Total, the design is effectively synchronized and sits in concord with the aspect of the body and the entrance/again. There are not any arrow symbols on the aspect body. These arrow symbols present a visible help to novice customers in figuring out the instructions earlier than the set up.

DARKFLASH CX6 AURORA SPECTRUM RGB White - The Backside of the Fan
The Bottom of the Fan

There’s a 6-arm meeting on the bottom holding the fan motor and blades to the body, together with a sticker. In contrast to most followers, the darkFlash CX6 AURORA SPECTRUM RGB doesn’t have its energy ranking and mannequin printed. Additionally, we’ve got seen a lot of the followers having 3-4 arms on the bottom. These followers are made in China. The black spots on the anti-vibration pads give a touch that that is in all probability a used fan. One of many arms is wider and has an inset on which the wires are routed from the middle to the body.

Contained in the Fan

These followers use Rifle bearings giving them a life span of 30,000 hours. I’m not positive nevertheless it looks like the motor has 4-poles.

4-pin PWM connector

The cables have a ample size, and they’re flat and white in colour together with the 4-pin PWM connector.DARKFLASH CX6 AURORA SPECTRUM RGB White - 3-pin, 5V ARGB female connector

3-pin, 5V ARGB feminine connectorThere is a typical 3-pin, 5V ARGB feminine connector with a flat white colour cable.

DARKFLASH CX6 AURORA SPECTRUM RGB White - 3-pin male connector
3-pin male connector

There’s additionally a 3-pin male connector. This permits the daisy-chaining of the followers for a single and synchronized management of the followers.

A-RGB Lighting

Surprisingly, darkFlash has talked about on the web site that these followers are appropriate with ASUS AURA SYNC. No different motherboard producer is talked about there. Since these followers use the usual 5V, 3-pin connectors, they are going to work with any motherboard. We’ve examined them on the GIGABYTE X670E AORUS MASTER utilizing RGB FUSION 2.0 and located them working flawlessly. They had been responding to the change within the gentle mode. Listed here are just a few photos of those followers in motion:


The next check bench is used for thermal efficiency testing:

A 30-minute run of Cinebench R23 is used to emphasize the CPU to check the thermal efficiency of the cooler. The comparability is between the DeepCool FK120 followers and the darkFlash CX6 RGB White followers.

Please notice that not each run of the stress check could yield the identical end result. This might effectively be because of many components like mounting strain, thermal paste software, and ranging ambient temperature. To not point out the silicon variations even among the many identical class of chips. Therefore, it’s pertinent to say the testing methodology together with the specifics.

Let’s check out the outcomes.

Thermal Efficiency

The ambient temperature was 18 to twenty°C roughly. There’s roughly a distinction of 1.3°C between the DeepCool followers and the darkFlash CX6 RGB White followers. That is truly a greater efficiency from the darkFlash followers for the reason that DeepCool FK120 is rated for as much as 2000 RPM with a static strain ranking of 3.27 mm H₂O and an airflow ranking of 85.85 CFM. FK120 are clearly high-performance version followers optimized for top static strain. Regardless of all this, the darkFlash followers have delivered a pleasant efficiency.


The followers at 100% of their pace had been doing roughly 51 dB(A) at an ambient of 32 dBA. The DeepCool FK120s had been doing 50 dBA.


The primary product we’ve got ever examined from darkFlash are these CX6 AURORA SPECTRUM RGB White followers. darkFlash affords these followers underneath their finances section. They’re obtainable in PWM and Voltage primarily based configurations. We’ve taken a spin on the PWM model. In addition to, these followers are additionally obtainable in black, pink, and neo-mint colours. So, colour customization is sweet on these followers since these are A-RGB so that’s one other plus over the coloured frames.

The CX6 RGB white followers have 7 translucent blades with a 3D stripe design to enhance the airflow and scale back the drag, and the white body of the followers is sort of fashionable and the general outlook is effectively synchronized. Not solely that, however the anti-vibration pads are white in colour as effectively. darkFlash has talked about the body as a targeted design. I’m not positive what is supposed by that as we don’t see something specular on the body that would assist generate the targeted airflow. Anyhow, no criticism there as these are a pleasant possibility on this value vary.

These followers are 120mm in measurement having a dimension of 120x120x25mm. They’ve a pace ranking of 800 ~ 2000±10% RPM with a most airflow ranking of 55.29 CFM and a static strain ranking of 1.63 mm H₂O. Their sound stage is rated at 018 to 30 dB(A). They use Rifle bearings with a life span of 30,000 hours.

These followers have commonplace 3-pin (5V) A-RGB connectors and a 4-pin PWM. The usage of commonplace connectors makes these followers appropriate with nearly all of the motherboards and exterior controllers. We examined the followers on the GIGABYTE X670E AORUS MASTER motherboard, they usually responded flawlessly to the change in dynamic and static colour mode altering utilizing the RGB FUSION 2.0.

The one fan pack of the darkFlash CX6 AURORA SPECTRUM RB White is out there within the native marketplace for PKR 18000/-. darkFlash has additionally an inventory of 3-in-1 and 5-in-1 fan packs. The one fan pack doesn’t have a controller and I’m not positive if the three and 5 followers packs include the controller.

We’ve pitched these followers in opposition to the high-performance FK120 followers from the DeepCool that are utilizing higher bearings and pack highly effective stats. We noticed the CX6 followers trailing the FK120 in thermal testing by 1.3°C. That is truly a greater efficiency from these followers given their common scores. darkFlash is focusing on these followers for case air flow and that is the place these followers will ship fairly effectively as they generate an excellent quantity of airflow. darkFlash appears to supply a 1-year guarantee on these followers whereas the native supplier is giving a test guarantee solely. The one caveat I’ve discovered is that these followers make excessive noise at full pace. I might recommend a customized fan curve.


Was our article useful? 👨‍💻

Thanks! Please share your constructive suggestions. 🔋

How may we enhance this submit? Please Assist us. 😔