Every now and then we get to do one thing that’s simply plain cool. That’s the ASRock Rack AM5D4ID-2T/BCM is an AMD Ryzen server motherboard with distinctive options. Except for the socket AM5 platform, the motherboard has a twin port Broadcom 10Gbase-T NIC for networking. That makes this platform additional attention-grabbing.
ASRock Rack AM5D4ID-2T/BCM {Hardware} Overview
Instantly whenever you see the ASRock Rack AM5D4ID-2T/BCM it stands out as a distinct kind issue. As a substitute of a 6.7″ x 6.7″ mITX kind issue, ASRock Rack calls this a deep mITX kind issue at 6.7″ x 8.2″. That measurement distinction is essential. It nonetheless permits a riser with double-width playing cards in 1U chassis. For these constructing their very own techniques, it additionally means not all mITX chassis will match the board due to the overhang simply previous the rightmost mounting holes within the picture under.
With the AM5 within the motherboard identify, we all know that is an AMD socket AM5 platform. On this evaluation, we’re going to use the AMD Ryzen 7 7800X3D half (Amazon Affiliate hyperlink) because the CPU. We used a lower-power and better core rely AMD Ryzen 9 7900 in our ASRock Rack 1U4LW-B650/2L2T Evaluation. Whereas these chips, and choices as much as 16 cores are nice, we wished to make use of one thing with 3D V-Cache. It affords one thing considerably totally different than Intel with not simply Zen 4 cores, but additionally a complete of 96MB of L3 cache. To be honest, we simply wished to do that chip and see if it labored, and it did. There are lots of different socket AM5 choices on the market.
For reminiscence, there are 4 full-sized DDR5 DIMM slots. These are UDIMM slots and with DDR5 reminiscence UDIMM and RDIMM slots are keyed otherwise. Nonetheless, one can use ECC UDIMM reminiscence in these platforms. We’re utilizing Micron reminiscence. Here’s a hyperlink to the modules we’re utilizing (Amazon Affiliate) however there are totally different choices.
Between the rear I/O and the AM5 socket, we have now an ASPEED AST2600 BMC for administration. There may be additionally a M.2 slot over that chip.
The M.2 slot is restricted to 2280 or 80mm SSDs however it is usually a PCIe Gen5 x4 slot.
On the backside fringe of the motherboard, we additionally get a PCIe Gen5 x16 slot. If you wish to use this as a storage platform, then the reply is so as to add a storage controller to that slot.
Within the nook, we get our entrance panel I/O.
There may be an Oculink enlargement port, however that is solely a PCIe Gen4 x2 port.
Energy is acquainted to those that have used these platforms earlier than. There are two CPU energy connectors. There may be additionally a 4-pin connector that ASRock Rack consists of an ATX energy provide adapter to make use of for issues like turning on an ATX energy provide. This design can be to assist the platform be used on DC energy. Except for that adapter, ASRock Rack additionally included an Oculink to U.2 cable and a SATA energy cable that plugs into the “For HDD Energy” connector.
The rear I/O has one thing totally different as nicely. There’s a customary VGA, twin USB 3 Kind-A, and administration NIC block. Then we get a VGA port. As a much less customary characteristic, we get a HDMI port on the again of the system utilizing the AMD Ryzen built-in graphics. We ran right into a case when putting in an OS the place the first monitor was set to the VGA/ IPMI show output on the BMC. Once we plugged in a HDMI monitor, we noticed a Welcome to GRUB display that’s usually what we’d see on a second show output throughout set up.
The 2 community ports are serviced by way of a Broadcom BCM57416 twin 10Gbase-T adapter that sits under a big heatsink.
Whereas that is nonetheless a small board, it is usually one which wants the additional house to suit all of its performance.
Subsequent, allow us to get to the block diagram and topology.